how to use Acrylic nail powder | NRN Nail Acrylic Powder
Acrylic nail powder is a material that is often used when making Acrylic nails. Many people like to make nails by themselves. In fact, buying the materials for making nails by yourself is a very simple thing and saves money.
Acrylic nail powder is a substance used to produce acrylic nails. It cannot be used alone, it can only be mixed with another liquid chemical that makes it hard. The price of this product is not expensive and you can make it yourself in a nail salon or at home. Acrylic nail powder makes nails look better and provides temporary protection. Although it is generally considered safe, the way that acrylic nails must be removed means that there are certain risks in using this product.
The main component of acrylic nail powder is polymethyl methacrylate (PMMA), which is a mixture of two monomers, methyl acrylate (EMA) and methyl methacrylate (MMA). It usually also contains benzophenone (benzophenone-1), which can keep the nail powder from discoloring when exposed to ultraviolet light. In addition, it also contains benzoyl peroxide (Benzoyl peroxide). In order to meet the fashion needs of consumers, manufacturers also produce pigmented versions, usually at a concentration of 2%, which allows people to have a wider range of color choices. In addition, some Acrylic nail powders have added glitter ingredients.
When used on nails, acrylic nail powder is mixed with a monomer liquid. In addition to avoiding the rapid combination of molecules, it also prevents yellowing and allows the color to spread evenly. In this process, the benzoyl peroxide in the powder acts as a catalyst, allowing the liquid monomer to form a stronger network chain between the powder particles, which can result in a hard resin.
- Cleaning method
To remove acrylic nail powder and resin formed by a single liquid, the nail must be soaked or covered with a solvent. Acetone is the most commonly used, but many people don’t like it because it has harmful side effects, such as irritation of the respiratory tract, causing dizziness and nausea. It takes at least 20 minutes to remove Acrylic nails. To prevent acetone from drying out the skin, apply petroleum jelly to the skin around the nails before starting.
The safety of Acrylic nail powder is very controversial, which may be related to its inclusion of methyl methacrylate. Methyl methacrylate has been banned by agencies such as the US Food and Drug Administration. However, this ban only concerns the chemical monomer liquid, excluding the polymer in solids and powders. The reason for the safety of the latter is that its molecules are too large to penetrate into the skin. Although Acrylic nail powder itself is not harmful to health, it requires solvent removal. These chemicals can produce toxic odors and can cause irritation if they touch the skin. They also reduce the thickness of the nails, and when combined with sanding tools, the nails will become thinner. There is also the risk of nail infection, which usually occurs when the skin or stratum corneum around the nail is damaged.
Under normal circumstances, the nail technician applies the acrylic nail powder and the single-component mixture on the nails with a clean brush. It usually extends from the bottom to the top of the nail, moving outward from the center. Since the chemical reaction causes the two substances to start to harden when they come into contact, they cannot be pre-mixed.
Moldy acrylic nail refers to the moldy phenomenon that occurs when moisture enters the gap between natural nails and artificial nails. The reasons are:
- Occurs in the prevention of warping.
- When repairing the acrylic armor, reapply powder without completely removing the warped part.
- Excessive water usage or no rubber gloves.
- People with sensitive skin will have allergic reactions if they are stained with disinfectant desiccant or acrylic nail fluid, so try not to get it;
- Grinding and polishing are touching the finger skin. At this time, the supporting hand should always maintain strong support, and the nail file will not touch the finger skin;
- After the acrylic nail is completed, the finger skin oil is not used for heat preservation, and the nail loses its oil content during the nail art process, so heat preservation is required after completion.
NRN COSMETICS Co., Ltd Is Nail Gel Polish and Nail Acrylic Powder Factory/Manufacturer/Wholesale Supplier From Guangzhou, China For 10 Years.
We Supply Nail Gel Polish and Nail Acrylic Powder In 1KG, 5KG, 25KG Bulk… Also, We Do Private Label/Custom Logo For All The Clients From All Over The World With Different Requirements.
With The Word’s Strongest and The Most Experienced NRN Group, We Also Can Do The Custom Formula For The Clients If You Can Provide Us The Samples!
Acrylic Powder Color Dip Powder Can Be Colored According To Your Needs And Can Be Customized. Complete Dip Powder Nail Production Supply Chain. For More Detailed Information Please to Add Whatapp: +8615822532116
You must log in to post a comment.